Roof inspections are necessary for spotting problems and increasing the life of your roof. Without regular inspections, you risk being blindsided by serious damage that could avoid if the problem had been found sooner.
After a hailstorm or other big weather event, you should get your roof inspected by a professional roofer in Dallas TX as a matter of thumb. Even if your roof appears in good condition on the surface, it may have underlying damage that only an expert can diagnose.
Aside from that, a routine roof inspection should be performed at least once or twice a year, preferably in the fall, to prepare for the winter season. Because freezing conditions are hard on any roofing system, you must ensure that your roof is in good working order before the winter arrives.
A roof inspection is also a smart idea in the spring. It allows you to inspect your property for any damage caused by snow and freezing temperatures during the winter. Aside from repairs, now is an excellent time to replace your roof. You should expect fewer delays and hassles if the weather is nicer during the project.
But how are roof inspections carried out in the first place? What makes them useful and effective? The many parts of a professional roof inspection in Dallas TX are discussed in this post by recognized Ready Roofing Dallas – Residential and Commercial Roofing Contractors.
Material Inspection
The condition of the actual roof material is the focus of material inspections. This usually entails looking for loose, missing, or curling shingles and missing flashing and corrosion. It also entails inspecting the rubber boots and seals surrounding the vent pipes for any cracks or evidence of corrosion. If your roofer discovers shingle aggregate in the roof valleys or on the ground near the gutter downspouts, your roof may be nearing the end of its useful life.
Workmanship Inspection
The longevity and performance of a roof system are directly proportional to the quality of its installation. That is why roofers pay particular attention to this during roof inspections. Poor installation or repairs are often the sources of problems like leaks and roof damage, so keep an eye out for warning indications. When the flashing around the roof penetrations is placed incorrectly, this is a common indication of poor workmanship.
Structural Inspection
Contractors examine for sagging and uneven roof planes during a structural assessment. Fascia, soffits, and gutters are also examined. If you have a chimney, the inspector will inspect it for crumbling grout, cracks, and damage to the chimney cap. Another thing they might look into is attic ventilation. If there isn’t enough ventilation in the attic, heat and moisture can build up. This can lead to additional issues such as ice dams and an impact on your roof.
Interior Inspection
The interior examination includes looking at the house’s ceilings, walls, and attic. Mold, water stains, decay, and other symptoms that water has gotten into your home are all things that roofing professionals look for.
After inspecting these areas, your contractor should provide you with a full report on the state of your roofing system and any needed repairs. Make sure these repairs are scheduled as soon as possible. The sooner you address these issues, the easier it will be to keep your roof in good working order.
SURVEY OF THE VISUAL
A visual survey is used to establish the general state of the roofing system and any probable history. Because many roofing systems have no history of maintenance or leaks, creating one is critical in deciding the owner’s next steps. You can anticipate a roofing expert to do the following during a roof inspection:
- Determine the materials used for the roof membrane, insulation, and decking.
- Determine the state of these components. Is there any moisture on the insulation? Is the roof deck in bad shape? Etc.
- Check for deterioration or delamination of the flashings around penetrations, field seams, curbs, and skylights.
- Correct any potential installation difficulties, such as faulty repairs, materials, or details.
- Look for hail or wind damage, ice, snow weight damage, or ice dams.
ANALYSIS OF A LEAK
A roofing leak analysis is another possible component of a roof inspection. This service is especially vital if the roofing system has not maintain in a long time. You can anticipate the roof specialist to do the following during a leak analysis:
- Make a leak history and a list of any active leaks.
- Determine what might be causing the leaks.
- Water ponding, clogged drains and gutters, poor drainage, and other concerns that could worsen leaks should identify.
- Do a thermal or moisture survey to establish water intrusion in the roofing system.
CAD FOR THE ROOF
If a more thorough examination is require, a roof consultant can conduct a more in-depth study to assist the owner in managing the roofing systems and identifying problems that the contractor can readily discover and rectify. This is accomplished using a Roof CAD drawing, which has the following features:
- To map the roof and conduct the above assessment, use a drone or unmanned aerial vehicle (UAV).
- Depict perforations, appurtenances, drainage, and other roof elements on a map.
- Identify issues with the roofing system by a professional.
- Based on the information gathered, estimate the repairs and/or replacement cost.
Trust & Communication
A roof examination by a roof consultant can cover a wide range of topics. Communication with the owner and building trust with the owner are the two most crucial things.
In a roof inspection, communication should come first. The roofing expert must describe the practicalities of the inspection to the owner and explain what is wrong with their roofing system in a language that they comprehend. We’re not here to brag about our knowledge; rather, we’re here to educate the homeowner so they may feel secure in their roofing choices.
Because a roof consultant bring in to tell the owner what they need to hear rather than what they want to hear, trust is essential in the owner/consultant relationship. This is the difference between a roof consultant and a roofing contractor: a roof consultant is looking out for the owner’s best interests, whereas a roofing contractor seeks to sell a roofing system.
Are you looking for a partner to assist you with a roof assessment for one or more of your buildings? Ready Roofing Dallas – Residential and Commercial Roofing Contractors provide expert, impartial roof inspections. We can provide unbiased assessments about your roof because we do not sell or install roofing materials. Are you ready to begin your inspection? Make an appointment with us right away! Find out How Much Is A Roof Inspection In Texas?
Do you want to know How To Inspect A Roof Without Walking On It?
